$ / EACH
Simpson Strong-Tie® WA12590 Wedge-All® Wedge Anchor, 1-1/4 in Dia, 9 in OAL, 2-3/4 in L Thread, Carbon Steel, Zinc Plated
Part #WAS125C0900Z
MFG #WA12590
UNSPC #31162102
Standard Pack 1
Simpson Strong-Tie® Wedge Anchor, Series: Wedge-All®, 1-1/4 in Dia, 9 in Overall Length, 2-3/4 in Thread Length, Carbon Steel, Zinc Plated, 5-5/8 in Minimum Embedment Depth, 1-1/4 in Drill, 1-7/8 in Head, 2099 lb Shear Strength, 3250 lb Tensile
- For interior environment, low level of corrosion resistance
- Code listed under IBC/IRC for grout-filled CMU per ICC-ESESR-1396
- One-piece, wrap-around clip ensures uniform holding capacity
- Threaded end is chamfered for ease of starting nut
- Available in a wide range of diameters and lengths
- Carbon steel ASTM A563 grade A nut
- The minimum concrete thickness is 1-1/2 times the embedment depth
- The allowable loads are based on a safety factor of 4
- 1-3/8 in minimum fixture hole
- 400 ft-lb installation torque
- 15160 lb at 2000 psi/24760 lb at 4000 psi ultimate tension loads and 3790 lb at 2000 psi/4990 lb at 3000 psi/6190 lb at 4000 psi allowable tension load for concrete
- 29320 lb at 2000 psi ultimate shear loads and 7330 lb at 2000/3000/4000 psi for concrete
- Anchor body material meets minimum 70000 psi tensile strength
Diameter 1-1/4 in Drill Size 1-1/4 in Finish Zinc Plated Head Size 1-7/8 in Material Carbon Steel Minimum Embedment Depth 5-5/8 in Overall Length 9 in Series Wedge-All® Shear Strength 2099 lb Tensile Strength 3250 lb Thread Length 2-3/4 in Thread Size 1-1/4-7